Contact Us

Contact Person : lemon

Phone Number : 18639025156

WhatsApp : +8618639025156

Free call

HL315 Autoclaved Aerated Concrete Equipment 5.5-22KW Power Long Service Life

Minimum Order Quantity : 1Pc Packaging Details : Standard Packing For Export
Delivery Time : 20-45 Days Supply Ability : 30Set/Per Month
Place of Origin: Henan,China Brand Name: WD
Certification: BIS ISO9001:2008 CE Model Number: HL315

Detail Information

Lift Height: <=30.16m Materlar-in Grade: <=45mm
Weight: 3T Capapcity: 21-36m*3/h
Type: HL315 Power: 5.5-22KW
High Light:

autoclaved aerated concrete machine

,

autoclaved aerated concrete equipment

Product Description

HL315 AAC Block In Series Of Autoclave Concrete Block Concrete Equipment

 

Product instruction

 

The Production Process Of Autoclaved Aerated Concrete Block:
1. Raw material storage
Flyash, sand, cement, lime, gypsum and aluminum powder should be stored separately in the corresponding stock yard. Then they will be disposed separately and transported to each work section when used.
2. Raw material disposed
Flyash and sand will be transported into the wet ball mill by the conveyor belt. Afterwards by slurry pump the slurry will be transported into slurry tank.
3. Batching, mixing and pouring
The lime and cement will be transported successively by the screw conveyor into automatic weigher for weighs, and the slurry will be transported by the slurry pump into automatic weigher for weighs. Afte weighing the powder and slurry will be transported into the mixer for uniformity and pouring into the mould box.
 

Working principle of Bucket elevator for aac line:

 

Hopper to scoop up material from the hopper, conveyor belt or chain with the upgrade to the top, flip down around the top rounds, bucket elevator tilt the material into the slot, with bucket elevator drive transmission with general with rubber band, below or above installed in the drive pulley and bend pulley on the following.
Bucket elevator are generally equipped with a chassis, to prevent the dust in the bucket conveyor.

 

Features of Bucket elevator for AAC line:

 

1. Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

2. Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4. The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

5. Wide application: bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.

 

AAC block advantages

 

(1) light weight

Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

(2) keeping temperature
It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or

1/5 of clay brick,so it is best materials now in the world.There are many kinds material,have

lowest waste.

(3) High Strength
High pressure steam-curing autoclaving process gives AAC unmatchable strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements

(4) Cost saving
Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%

 

 

Application of Bucket elevator for AAC line

 

Bucket elevator is a fixed mechanical conveyor equipment, mainly lifting powder, granules and small lump materials continuously and vertically, widely used in feed factory, flour mill, rice mill, oil factory, starch factory, grain depot and ports.

 

Model

Capacity

(m3/h)

Lift height

(m)

Materlal-in grade

(mm)

Motor power

(kw)

HL300 16-18 <=30.16 <=40 4-22
HL315 21-36 <=30.16 <=45 5.5-22
HL400 30-47 <=30.22 <=50 7.5-22
D200 8-15 <=30.02 <=25 3-11
D250 11-22 <=30.08 <=35 4-15

 

 

HL315 Autoclaved Aerated Concrete Equipment 5.5-22KW Power Long Service Life 0

HL315 Autoclaved Aerated Concrete Equipment 5.5-22KW Power Long Service Life 1HL315 Autoclaved Aerated Concrete Equipment 5.5-22KW Power Long Service Life 2

You Might Be Into These
Get in touch with us

Enter Your Message

miao@cnwdmachine.com
+8618639025156
18639025156
86-18639025156
3590904546