Industrial AAC Block Production Line 1.1Mpa-1.4Mpa Pressure For Block Production Line
Contact Person : lemon
Phone Number : 18639025156
WhatsApp : +8618639025156
|Minimum Order Quantity :||1 PC||Price :||Negotiation|
|Packaging Details :||Standard Packing For Export||Delivery Time :||20-45 Days|
|Supply Ability :||30 Sets Per Month|
|Place of Origin:||Zhengzhou,Hennan,China||Brand Name:||WANGDA|
|Material:||Steel||Color:||In Your Need|
|Volume Of The Mixer:||4 M³||Shaft Rotating Speed:||600 R/min|
|Running:||15 M/min||Motor Power:||13 Kw|
autoclaved aerated concrete machine,
aac block equipment
JBG - 4 Fixed And Movable Casting Machine / Pulper Autoclave Aerated Concrete Block
Casting machine is applicable for mixing the raw materials to make them well-proportioned and reacted with each other adequately, and pouring the mixed slurry into mould frame in due course
Casting process is divided into mobile and fixed-point cast two types of casting. Mobile mixer pouring is walking down to the material with a good mixer, while mixing while moving, mixing well after reaching mode bit aerated concrete slurry into the mold.
Fixed point in pouring the ingredients stand mixer sucked beneath the die to move to the next mixer,
mixing well to accept the mixer has been aerated concrete slurry, and then die and then move to the
designated location to complete their hair air hardening process.
The Performance Advantage:
1. Lightweight: Porosity achieve 70% to 85%, volume density is generally 500 ~ 900kg/m3, as 1/5 of general concrete the 1/4of clay, the 1/3 of hollow brick, and similar with wood can float in water. It can reduce building weight, reduction in the cost of integrated building.
2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 90mm walls can reach to 245 minutes fire resistance, 300mm thick up wall can reach to 520 minutes fire resistance.
3. Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 10mm thick wall up to 41 db.
4. Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.
5. Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles.
6. Anti-seismic: The same building structure, improve the two seismic than the brick level.
Pro-environment: Manufacturing, transportation, all use the process of pollution, to protect arable land, saving energy, is one kind of a green building material.
7. Durability: material strength is stability, in the specimens tested after one year of atmospheric exposure; the intensity increased by 25%, and remained stable after ten years.
8. Shortcut: it has good machinability, can be sawed, planed, drilled, nailed, and available appropriate as bonding of adhesive material, so create favorable conditions for building construction.
9. Cost-saving: An integrated lower cost than using more than 5% of solid clay bricks, and can increase the usable area, greatly enhance the utilization of floor space.
|Type:||AAC casting machine|
|Brick Raw Material:||Fly Ash|
|Processing:||Brick Production Line|
|Capacity:||4 cubic meter, Large|
|Place of Origin:||Henan, China (Mainland)|
|After-sales Service Provided:||Overseas service center available|
|Volume of the mixer||m³||4|
|Shaft rotating speed||r/min||600|
1. Depending on customer's requirement, we insist on "making profit at lowest investment" and gives best solution as per the customer’s special demand.
2. Design the most reasonable project and maximum customers' profit.
3. Provide engineers to scene to plan work site if the customer needed.
4. Provide equipment list, design drawing, construction drawing, equipment install drawing.
1. Depend on scene, draw design drawing , construction drawing, equipment install drawing, civil work detailed drawing for references, operating manuals, maintenance video, etc
2. Manufacturing products strictly on contract while customer constructing.
3. Production progress report each week with detailed description and photos, including raw materials tables, process and deep process record, testing data sheet, etc.
4. Testing all the equipments by witness of the customer ex-work, delivery, customer acceptance.
1. Provide engineer to work site guiding install, debugging and commissioning.
2. Test equipment after installation, training operators for free, remind notice in operating.
3. Regularly returning visit to the customers.
4. Within warranted period, we take charge of everything if any quality problems. After the warranted period, we still focus on the plant running and services.
5. Response customer’s questions within 1 working day, give effective solutions within 3 working days, go into action with 5 working day.
1. What's the raw material for producing bricks?
2. How much land area for building a new brick plant?
It need above 20,000 square meters,the land area relate with capacity
3. when you need our proposal and quotation,what you have to mention in your inquiry.
Please provide daily capacity,the brick size and you want to build a new brick plant or brick making machingery only. so we can give the proposal and offer accordingly.
4. What's the Trade terms?
It can be EXW,FOB,CIF.